From the bush to the log yard
Forestry and timber handling
“I handle timber and the operator cannot see the face or is unprotected”
A whole family, not one attachment: an elevated and tilting cab to see the work face, structural guarding, forestry boom, grapple, felling head or processor — and a specific configuration when the ground is steep.
- Base machine
- Komatsu PC210LL-10
- Operating weight
- 29,537 kg
- Komatsu heads
- S132 · S162E · S172
- Optimal working diameter
- 6 – 48 cm
Where it is used
The jobs it solves
- Felling and processing standing timber
- Loading and sorting logs in the yard
- Delimbing and cross-cutting to length
- Work on steep ground
- Biomass and slash handling
Cab and guarding change as much as the tool: in forestry the risk is what falls, not what you dig. If the job is fully mechanised harvesting on wheels, Komatsu also builds the 931XC harvester and the 875 and 895 forwarders: those are quoted as machines, not as a configuration.
It arrives as one machine, with one point of responsibility
A single point of responsibility
The base machine, the special configuration and the commissioning arrive as one machine delivered by the group. No finger-pointing between suppliers when something fails.
Local support for the base machine
It is a Komatsu: parts, workshop and certified technicians in El Salvador, Guatemala, Nicaragua and Panama, with the same KOMTRAX telematics as the rest of the fleet.
Sized against the project
Reach, depth and soil type govern, not a catalog. It is defined in a technical visit and quoted against the real job, not against a list of options.
Other configurations
Long-reach excavator
Reach without entering the water
Amphibious excavator
Where a standard undercarriage sinks
High-reach demolition
Taking the structure down without taking the machine down
Material and scrap handling
Seeing inside the container
Pedestal boom system
The machine that doesn't move
Amphibious carrier
Getting the spoil out of the swamp
Tell us the job, not the machine
What has to be moved, at what depth, over what ground and for how long. With that we define the base machine and the configuration, and the proposal comes back against the real job.
Request a technical visit